Build Instructions - Main Body
Step 3.1
Click/tap the thumbnails to select an image.
Click/tap the main image for a full size view.
Tools
Glue
Parts
1x End Panel (for Steps)
3x Steps
1x Wide Step
5x Step Supports
Stages
Insert the step supports and steps into the relevant slots in the end panel.
Glue in place if necessary.
The wide step at the top has 2 supports.
Step 3.2
Tools
Glue
Parts
1x Base With Buffers (from Step 1.3)
1x End Panel With Steps (from Step 3.1)
1x End Panel With Vent
Stages
Glue one of the end panels onto one end of the base (above the buffer beam).
Glue the other end panel onto the other end of the base.
Step 3.3
Tools
Glue
Parts
1x Left Side (from Step 2.7)
1x Right Side (from Step 2.7)
4x Roof Braces
Stages
Glue one of the side panels onto the side of the base (check the vent hole is at the correct end).
Glue the other side panel onto the opposite side of the base.
Glue the 4 roof braces into place.
Step 3.4
Tools
Glue
Parts
1x Bulkhead
1x Window
Stages
Glue the window into the bulkhead.
Glue the bulkhead into the body.
Step 3.5
Tools
Glue
Tape
Parts
1x Roof
Caution
Before proceeding, be sure to remove the protective film from the inside surfaces of the all 7 windows.
Stages
The roof piece is perforated to allow it to bend. Before breaking the joins, add 3 or 4 strips of tape to the underside of the roof (this will keep the strips together).
Glue the roof in place